IntraSite Gel is non-adherent, so is easily removed from the wound with a normal sterile saline solution, without damaging any fragile tissue or causing any unnecessary pain.
How To Use Intrasite Gel:
Step 1: Prepare wound site and remove secondary dressing.
Step 2: Prepare pack by removing the blue protective cap from the nozzle and then snap the patterned tip off the nozzle.
Step 3: Introduce IntraSite Gel into the wound, keeping the nozzle tip clear of the wound surface and gently press the bowl of the pack to dispense gel into the wound. Smooth IntraSite Gel over surface of wound to a depth of approximately 5mm (0.2in.) Discard any unused gel.
Step 4: Dress the wound and cover with a secondary dressing of choice (use a dressing such as Allevyn or Melolin Low-Adherent Absorbent Dressing).
Step 5: Remove the IntraSite Gel, which can be removed from the wound by rinsing with sterile saline solution. On necrotic and sloughy wounds, it is recommended that the dressing is changed at least every three days. On clean granulating wounds, the frequency of dressing changes depends on the clinical condition of the wound and the amount of exudate produced.